IWAKI IX-C/D Dosing Pumps

IWAKI IX-C/D Dosing Pumps

A new generation of digitally controlled direct-drive diaphragm pumps for highly precise control

Iwaki’s IX Series are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate and energy efficient metering pumps with high resolution. The IX Series meet today’s demand for automated chemical delivery in industries from water treatment to chemical process.


A wide turndown ratio

A control motor adjusts the discharge and suction speeds to meet a wide turndown ratio of 750:1 from 0.2 l/h to 300 l/h. (S6 type 150:1)

Automatic control

The IX can run in analogue, pulse, batch or interval batch modes. At analogue operation the pump operates in response to an input, (4 to 20 mA) from a sensor. Pulse operation means, if combined with a flow meter or contact head water meter, the IX pump gives a paced dose rate in proportion to the main flow rate. Batch operation is possible with simple pump programming via the keypad and initiated by a pulse signal. In case of interval batch operation, timed operation is possible with simple pump programming via the keypad and is initiated with a pulse signal.

Energy savings and Eco-friendly

With the use of helical gears and spring assistance, power consumption is reduced by 70 % compared to the standard spring back design.

Downloads

Key information

MAX FLOWMAX HEADMAIN MATERIALSINPUTTEMP RANGE
300 l/h
10 bar
SUS316 / PVDF
62 W
0 to 80°C

IWAKI IX product information


IWAKI IX product demonstration

Book

Training

Onsite training

We offer customised training at your offices or onsite. Our goal is to maximise the efficiency for your engineering team during troubleshooting, minimising downtime. We concentrate on installation, product connectivity, and maintenance. For more information, please contact us and outline your team's specific needs.

Virtual training

In a fast-paced environment, we recognise the value of bite-sized training, especially when project teams are dispersed onsite or across different locations. To minimise time away from facilities, we provide intensive product training through video conferencing. For further details, please contact us and outline your team's specific needs.

Request training

Follow us on LinkedIn

Sensys Ltd

Head Office
Unit 9 Pond Close
Walkern Road
Stevenage
Hertfordshire
SG1 3QP
United Kingdom

01438 759 595
enquiries@sensys.co.uk

Join our mailing list

Sensys icon

Enquire Now